Mould Exterminator is a ready-to-use, advanced mould remediation solution formulated to rapidly kill and remove mould, fungi, and associated staining. Its powerful stain removal can be seen almost instantly when applied to mould-affected surfaces. Mould Exterminator's potentiated chlorine technology penetrates deep into the affected surface completely destroying the mould hyphae and root system, making it ideal for sub-floors, external walls, roofs, and uninhabited structures. This ensures a 100% clearance report on every mould remediation job.

 

Benefits

• Disinfects bio-contaminated surfaces.
• Kills mould (including roots and hyphae) and removes the staining.
• Penetration: To provide complete mould removal of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner-structure of fibre and porous substrates.
• Cleaning: Mould Exterminator also provide outstanding cleaning power to remove the accompanying organic grime.
• Almost instant stain removal with no scrubbing.

Application areas and surface suitability

Ideal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways.

How to Use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.

Special use notes:

• Do not use or allow contact on carpets, fabrics or sensitive surfaces.
• After cleaning and disinfection is completed, Actichem Biosan II can be applied as a post residual treatment for enhanced inhibition of fresh mould growth.
• Further information can be found in the Actichem Mould Dream Team booklet.
• Masonry and stone surfaces can be sealed with an Actichem penetrating sealer to prevent future mould growth.

Dilution

Do not dilute. Ready to use

Application

1. Ready to use. No mixing required.
2. Remove and clean away all wet and dry debris.
3. Apply Mould Exterminator to the affected area. Ensure all surfaces come into contact with the Mould Exterminator. Application can be by means of spray, mop or cloth.
4. Agitate areas with organic or mould build-up to promote complete removal of the bio-mass. Agitation will also aid mould and stain removal.
5. Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
6. Rinse thoroughly with clean water, where possible.
7. Repeating this process may be required for areas with heavy organic loading.